|
These unique cylinder shaped two and three gallon aquariums offer a seamless, 360 degree panoramic view of your fish. They feature dazzling multi-colored LED lights in seven color choices that you can set to or change as you wish. The hood was shaped and specially designed to glow with your choice of color, creating a fabulous light effect at night or in any darkened area.
Constructed out of a durable polymer resin, the AquaView 360 makes a spectacular addition to your home or office decor. Great for most small freshwater fish. Simple enough for the casual or beginning enthusiast, impressive enough for the most advanced enthusiasts.
Kit includes: Aquarium, Hood with cool low-wattage LED lighting air pump and under gravel filter system. Gravel, fish and decorations sold separately.
3 Gallon Tank
Measures - 27.5" Circumference x 14" H
2 Gallon Tank
Measures - 27.5" Circumference x 10" H
Cleaning and Care Instructions
Remove all parts from package carefully.
Rinse the tank with warm water only - NEVER USE SOAP TO CLEAN THE TANK.
The area you are going to place an Aquarium should not get any direct sun light and make sure to place the unit on a surface that cannot be damaged from water.
Place the LED Light Unit in the center of the area you have chosen to setup the Aquarium and place the Tank over it making sure to line up the slot provided in the Tank's bottom to the LED Light Unit. The LED bulbs should be lined up with the center of the Tank.
Insert Riser Tube all the way into the socket provided in the Filter Plate.
Lower Filter Plate into Tank with the Riser Tube pointing up.
Add gravel and decorations as desired (purchased separately).
Connect Air Stone to one end of the Rigid Tube and Insert Tubing Adapter in other end. Insert the Flexible Air Line down through the top of the Domed Hood and connect the Flexible Air Line Tubing, to the Tubing Adapter.
Connect the other end of the Air Line Tubing to the Air Pump.
Fill Tank with water to approximately 1 in from the top of the Tank.
Place the Domed Hood onto the top of the Tank making sure it is seated flush onto the Tank's rim.
Form a drip loop to the right and plug in the Air Pump into a standard 110 volt wall socket.
Form a Drip loop with the LED Transformer cable and plug the small round end into the LED Light Unit then plug the Transformer into a standard 110 volt wall socket.
BEFORE ADDING FISH the water should be checked for it's suitability to accept whatever type of fish you will be adding.
|